Hi,
If we have 1 physical server with 8 core,
Inside physical server have 1 VM with 12 core and installing Microsoft SQL Server 2012.
For Verification of Microsoft SQL Server Core Licensing we should Refer to Physical Core or VM Core?
Thanks...
ONG
↧
Verification Of Microsoft SQL Server Core Licensing
↧
SQL 2014 SP2 does not allow to select instance to apply patch.
Hi,
I have 11 SQL instances running on single virtual box and it is SQL 2014 standard edition SP1 CU5.
I am trying to apply SP2 on all 11 instances. But when I reach 'select features' tab, I am not able to select any single instance to proceed.
can you please help me why I am not able to select and how can I fix the issue?
Hope to hear soon.
Regards,
Nik
Regards, Naman
↧
↧
SQL SPN
I had a few general questions about SQL & SPNs:
- Do I have to register the SPN of SQL?
- Does it matter if the Service is running under LocalSystem or a Domain user?
- Despite the fact that I registered my SPNs I nevertheless see in the SQL log and error stating:The SQL Server Network Interface library could not register the Service Principal Name (SPN) [ MSSQLSvc/SERVERNAME:PORTNUMBER ] for the SQL Server service. Windows return code: 0x2098<c/> state: 20. Failure to register a SPN might cause integrated authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies and if the SPN has not been manually registered. Is this OK? Is there a reason?
↧
Getting "No mapping between account names and security IDs was done" when install full text search feature for SQL 2012
Hi,
I'm attempting to add the full text search feature to one of our SQL environments.
Once the install has started it throws this error message twice. "No mapping between account names and security IDs was done". I get options to retry or cancel, cancel seems to just skip and continue the install.
The install seems to complete successfully once you cancel the error message.
I've checked the databases and we don't have any users or group assigned to roles that are not in the AD domain.
I'm stuck as to what else to look for....
Here is an extract from the error log:
(01) 2017-02-01 10:33:32 SQLEngine: Loading group properties from local machine.
(01) 2017-02-01 10:33:32 Slp: Sco: Attempting to open registry subkey SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL11.ENOTINGINSTANCE\Setup
(01) 2017-02-01 10:33:32 Slp: Sco: Attempting to get registry value SQLGroup
(01) 2017-02-01 10:33:32 Slp: Sco: Attempting to get registry value FDHOSTGroup
(01) 2017-02-01 10:33:32 Slp: Sco: Attempting to get account from sid S-1-5-80-61038044-1460991423-2496639405-3432405572-984320763
(01) 2017-02-01 10:33:32 Slp: Sco: Attempting to get account from sid S-1-5-80-1529172933-1289199595-2667646192-4261488767-1522532605
(01) 2017-02-01 10:33:32 Slp: Sco: LookupAccountSid failed for SID S-1-5-80-1529172933-1289199595-2667646192-4261488767-1522532605
(01) 2017-02-01 10:33:32 Slp: Prompting user if they want to retry this action due to the following failure:
(01) 2017-02-01 10:33:32 Slp: ----------------------------------------
(01) 2017-02-01 10:33:32 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
(01) 2017-02-01 10:33:32 Slp: Inner exceptions are being indented
(01) 2017-02-01 10:33:32 Slp:
(01) 2017-02-01 10:33:32 Slp: Exception type: Microsoft.SqlServer.Configuration.Sco.ScoException
(01) 2017-02-01 10:33:32 Slp: Message:
(01) 2017-02-01 10:33:32 Slp: No mapping between account names and security IDs was done.
The SID ending in 605 seems to be for the local service account used to run the full text search daemon.
Thanks
Joe
↧
SQL Server 2014 Express 64bit Missing DLL
Hello,
I am trying to install SQL Server 2014 Express with advanced services on a windows 7 sp1 machine. While running the installation file I downloaded from MSDN, I received a failure warning stating there is a DLL missing. I had a similar experience with SQL Ser2012 and was never able to install it.
↧
↧
SQL Server 2014 installation-failed-error-1723-problem with windows installer package
Hi All,
I am trying to install SQL Server 2014 express edition on my Windows 7 64 Bit system, but unfortunately, everything I have tried so far has resulted in the same error.
Error: 1723 There is a problem with this Windows Installer package. A DLL required for this installation to complete could not be run. Contact your support personnel or package vendor.
I have tried all the possible solutions that I found online. So please refrain from posting a link to another blog or forum because chances are that I have already tried that.
Things that I have tried:
- Giving myself/Everyone "Full Control" over the folder C:\Users\username\AppData\Local\Temp
- Disabling .Net Framework 3.5 SP1 and then re-enabling.
- Installing sqlncli.msi manually from cmd with Administrative Privileges (Note that this too fails with the same error).
- Removing all instances and traces (registry values, folders, uninstalling) of SQL Server 2008 R2 installed previously on my machine.
- Downloading SQL Server from Microsoft's website again (in case the previous installer was corrupted), performed checksum and validated the installer.
- Making sure that I have Service Pack 1 installed for my operating system.
- Resetting windows installer.
I am aware that there are multiple threads with the same issue, but none have been able to resolve this for me.
It is really urgent for me to resolve this and install the package over the weekend. Any help would be really appreciated.
Note: I am unable to add the links to the log files as of now, but would do so ASAP.
↧
Can't Install SQL server 2016 Sp1 on my computer Windows 10
Please can you share solutions on how i can install sql successfully on my PC
↧
new SQL server setup
Hi,
based on my general knowledge of setting up SQL server on VM, I remember a best practice (or Right thing to do) about appropriate planning for number of processors. Especially, adding processors to production SQL set on VM.
I need a confirmation if it is really sensitive matter about adding processors to SQL server Virtual machines.
Don't think that hypervisor make any difference. But just in case, I am talking about VMWare platforme.
Please provide a link to a document describing the impact of adding processors or just simple explanation why it is not recommended or just MUST not be done.
Thanks.
--- When you hit a wrong note its the next note that makes it good or bad. --- Miles Davis
↧
Avoiding changing Connection Strings after SQL Upgrade/Migration
I'm a DBA with a question. I am upgrading from sql2008R2 to SQL 2014. I'd like to do a side-by-side upgrade. When I am finished, I'd like to change the name of the upgraded server to the old server's name
so that all connections from applications still work. Is this possible? I don't need lot's of detail just is it possible.
↧
↧
Setting Up Mirroring With TDE
I am having troubles setting up a mirrored pair while using TDE.
I am able to successfully setup mirroring on a non-encrypted database
I am able to successfully setup TDE on the primary node and restore the database and associated certificates on the secondary node, provided that the database is fully recovered on the secondary node.
But
I am not able to get mirroring to work while TDE is running. When I try to setup mirroring I get an error that says that it can't open the database on the secondary node to modify it. (Which makes sense because it is supposed to be restored with no recovery.)
Any help?
↧
SQL 2008 R2 upgrade setup does not show the configuration file
Hi,
I am trying to upgrade my SQL 2008 R2 SP3 SQL server with the hotfix MS15-058 hotfix. The upgrade fails with the below error . This is the passive node of the cluster. When I run the setup and at the Ready to Update screen, I don't see the configuration.ini file being generated either. Can you please assist on this ?
2017-02-01 00:05:35 Slp: Sco: Attempting to open registry subkey Software\Microsoft\Microsoft SQL Server\Instance Names\OLAP
2017-02-01 00:05:35 Slp: Sco: Failed to open service handle for service MSOLAP$XXXX
2017-02-01 00:05:35 Slp: Sco: Failed to open service handle for service ReportServer$XXXX
2017-02-01 00:05:35 Slp: Attempting to run patch request for instance: XXXX
2017-02-01 00:06:42 Slp: Error: Failed to run patch request for instance: XXXX (exit code: -568706566)
Instance XXXXoverall summary:
Final result: The patch installer has failed to update the shared features. To determine the reason for failure, review the log files.
Exit code (Decimal): -568706566
Exit facility code: 1562
Exit error code: 14842
Exit message: Cannot create a file when that file already exists. (Exception from HRESULT: 0x800700B7)
Start time: 2017-02-01 12:12:02
End time: 2017-02-01 12:13:04
Requested action: Patch
↧
Unable to Install SP4 on SQL Server 2008 instance. Getting the following error.
Hi ,
I am trying to upgrade my SQL Server 2008 Enterprise edition with SP4. Getting the below error while upgrading . Checked and verified that there are no cluster service running on the server. Please find below the screenshot.
I have tried to run the setup via command prompt by skipping the rule but the installation is not starting . Could you please provide your inputs on the same.
Thank you.
↧
SQL Server Version and Edition on Linux
Hi All,
Recently, I have gone through the documents for SQL installation on Linux(Red Hat and Ubuntu).
I am not able to get the information about What SQL editions /versions we can install on Linux.Can anyone please share, if there are any information/links related to this.
Recently, I have gone through the documents for SQL installation on Linux(Red Hat and Ubuntu).
I am not able to get the information about What SQL editions /versions we can install on Linux.Can anyone please share, if there are any information/links related to this.
↧
↧
After applying the CU2: Unable to launch runtime for 'R' script. Please check the configuration of the 'R' runtime.
Hi,
After I install the CU2 for SQL Server 2016, I receive this message when I try to run an R script:
Msg 39021, Level 16, State 1, Line 1
Unable to launch runtime for 'R' script. Please check the configuration of the 'R' runtime.
Msg 39019, Level 16, State 1, Line 1
An external script error occurred:
Unable to launch the runtime. ErrorCode 0x80070057: 87(The parameter is incorrect.).
Msg 11536, Level 16, State 1, Line 1
EXECUTE statement failed because its WITH RESULT SETS clause specified 1 result set(s), but the statement only sent 0 result set(s) at run time.
before the update, everything worked fine.
what can I do?
↧
set application to sql server
Hi,
fresh SQL 2012 installed. Planned to serve couple of applications.
Server was properly partitioned for the beginning of the project. Some questions may come later... For now I have few.
What info should be provided to Application supplier that will need to use SQL?
1. SQL server name. In what format?
2. User rights. The standard user account will be created for the App supplier.
What are the correct Rights that should be assigned to that user on SQL server if any...
The standard account will be added to local admin group on Application server.
How correctly manage his access to DB? Please provide step by step instructions or precise doc. I am not a DB admin.
And did SQL installations on APP servers directly.
I guess I have to create a DB on SQL server (for eliminating any access of supplier to SQL server) and then provide the right path (server name\DB name).
Please help.
Thanks.
--- When you hit a wrong note its the next note that makes it good or bad. --- Miles Davis
↧
Question about installing Cumulative Update Package 7 for SQL Server 2012 SP3 via SCCM/WSUS
Good morning everyone, just a quick question about upgrading multiple servers to Cumulative Update Package 7 for SQL Server 2012 SP3 - KB3205051. According to the Microsoft Update Catalog you can only use WSUS to upgrade up to CU5 RE:
http://www.catalog.update.microsoft.com/Search.aspx?q=SQL%20Server%202012%20SP3
Does anyone know why CU6 and CU7 are not available? Windows Update won't get CU7 either; it seems that the only way to apply the update is to download it from Microsoft and install it manually?
↧
How can I add a sql user as a sysadmin during SQL Server 2016 Express installation?
I'm trying to find a way to add a sql sysadmin user when I install Microsoft SQL Server 2016 Express.
Currently I use the following command line syntax to install SQL Server...
SQLEXPR_x64_ENU.exe /QS /ACTION=Install /FEATURES=SQL
/INSTANCENAME=SQL2016EXPRESS /AGTSVCACCOUNT=sqlagent
/AGTSVCPASSWORD={PASSWORD} /AGTSVCSTARTUPTYPE=Automatic
/SQLSVCACCOUNT=sqldbengine /SQLSVCPASSWORD={PASSWORD}
/SECURITYMODE=SQL /SAPWD={PASSWORD} /ADDCURRENTUSERASSQLADMIN
/IACCEPTSQLSERVERLICENSETERMS /IACCEPTROPENLICENSETERMSI was hoping there was some type of way to do this with a switch (such as /SQLSYSADMINACCOUNTS). Unfortunately from what I can tell the switch /SQLSYSADMINACCOUNTS only deals with Windows accounts and NOT SQL accounts.
Is there any way to accomplish my goal while I'm installing SQL Server?
List of install switches documented on MSDN
Arvo Bowen III
↧
↧
"Power Options" for Sql VMs...?
In the past our Sql installs were done on physical hardware and we set the power option choice to "high performance". I presume that no longer applies to the case of a VM with Sql installed but does this power setting now apply to the HOST of that VM?
TIA,
edm2
↧
Appearance of property windows
Hi All,
when I try to setup a new operator for SQL Server Agent, the content of the window is not readable...so are all other property windows...I put the screenshot as my avatar / profile picture since my account is not verfified yet so I cannot upload pictures here. Any ideas how to solve the issue? Thanks a lot in advance! Cheers, Flo
↧
Microsoft.SqlServer.Management.Common.SqlConnectionInfo.set_IsActiveDirectoryUniversalAuth(Boolean)'. (ConnectionDlg)
I am not able to connect to the server using SQL server 2016 client. Below is the error information:
Cannot connect to XXXXX\XXXX
===================================
Method not found: 'Void Microsoft.SqlServer.Management.Common.SqlConnectionInfo.set_IsActiveDirectoryUniversalAuth(Boolean)'. (ConnectionDlg)
------------------------------
Program Location:
at Microsoft.SqlServer.Management.UI.ConnectionDlg.SqlServerType.Microsoft.SqlServer.Management.UI.ConnectionDlg.IServerType.GetConnectionObject(UIConnectionInfo ci)
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
↧