Hello -
I have a SQL server with multiple instances on it and a application is telling us that it only supports SQL Server 2008 R2 and currently all those instances are SQL Server 2008.
My question is can I just upgrade the one instance that houses the application that needs 2008 R2 or will I need to apply that upgarde to all the instances on that server?
Regards,
David
Hello!
On the Instance Configuration and Database Engine Configuration pages of the SQL Server 2012 Setup there are options to choose the location of the directories:
Which of the following directories require separate drive and what capacity and type of the drive is recommended for the following data directories according to the best Microsoft practices?
Thank you!
I have a named instance of SQL Server 2008 R2 installed in my local computer. This computer is connected in a LAN to a domain. The sql server uses windows authentication. I log into the computer with my domain account. This login name is an user of the local computer (Administator). It is also a valid login of the database I created a year ago. Even more it is the owner of the Database (dbo). I am developing an application on VB .NET and everything was working fine. I was able to connect to the database from my application and perform lots of functions that effected the database (CRUD).I do not know what I did but after "something I did" I cannot open the database from the application anymore. I get a System.Data.SQLClient.Sqlexception error whose message is: Cannot Open Database:"c:\BDDSICS\SICS.mdf" requested by the login. Login failed for user 'Control\camilo.henao'.
I am able to log in into the data base from the Microsoft SQL Server Mangement Studio using the same login I use to run the application. I work fine from the MSSSMS with no problem.I have tried many things like running as administator, both the MSSSMS and Visual Basic 20120 Express, have changed the default data base for this login to master and to the actual database and yet I cannot get over this problem. I uninstalled and reinstalled SQl Server and VB 201o Express just to obtain the same behavior.
Any assistance would be greatle appreciated.
Hi everybody,
I have SQL Server 2008 R2 SP1 installed and VS 2010 SP1 installed (Ultimate edition of VS). I tried to install SQL Server 2012. I had failures with the following:
It seems it's looking for installation file of VS 2010 Ultimate. My question is - why does it looking for that file during installation of SQL Server 2012 and what should I do if I can not find it? I searched my C drive for that file using Agent Ransack and it didn't find it. I don't remember the exact details of how did I install the VS 2010. I found SP1 files for VS 2010 saved. What should I do now? Thanks in advance.
This is what I have installed for VS Ultimate 2010. I also searched my Downloads folder and I could not find anything that looks like VS install. I really don't remember where I could have saved it (if I did). I don't have DVD media as I used MSDN Ultimate Subscription (which now has expired already) to install VS 2010.
Microsoft Visual Studio 2010For every expert, there is an equal and opposite expert. - Becker's Law
My blog
HI,
I downloaded the ISO image from MDSN and try to install it in a Virtual PC 2007 Windows 2008 R2.
I keep receiving the following error:
-------------------------------------
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893608
Start time: 2012-05-22 10:28:29
End time: 2012-05-22 13:04:44
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: WIN-QI1F5X7AY9F
Machine processor count: 1
OS version: Windows Server 2008
OS service pack: Service Pack 2
OS region: United States
OS language: English (United States)
OS architecture: x86
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Package properties:
Description: Microsoft SQL Server 2012
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: D:\x86\setup\
Installation edition: Enterprise
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: WIN-QI1F5X7AY9F\Administrator
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120522_102532\ConfigurationFile.ini
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, AS, RS, CONN, IS, BOL, SSMS, ADV_SSMS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: <empty>
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: WIN-QI1F5X7AY9F\Administrator
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 1
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120522_102532\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Reporting Services
Component error code: 0x80131018
Error description: The module was expected to contain an assembly manifest. (Exception from HRESULT: 0x80131018)
Error help link:
http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0x0DEECF98%400xBCB6F945&EvtType=0x0DEECF98%400xBCB6F945
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0018
Error description: Could not find the Database Engine startup handle.
Error help link:
http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0xE53883A0%400xBE03358B%401306%4024&EvtType=0xE53883A0%400xBE03358B%401306%4024
Feature: Integration Services
Status: Passed
Feature: Analysis Services
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120522_102532\SystemConfigurationCheck_Report.htm
-------------------------------------------------
Any help will be appreciated.
TIA
MarcosGalvani
On Windows Server 2008:
SQL 2008 SP3 Error:There are no SQL Server instances or shared features that can be updated on this computer
Hi,
I have a customer who is facing dead lock issue in the server. We have tried many ways to resolve it and could not. As other customers a working fine the only difference we see is that this customer is having SQL failover Clustering. I want to create a test lab with SQL server clustering to test our application. Is ther any easy way to create this?
Thanks,
Lalit Sinha
Hello
While I am installing Microsoft SQL SERVER 2012 PowerPivot for excel, I get an error:
The cabinet file 'Redist.cab' required for this installation is corrupt and cannot be used. This could indicate a newwork erro, an error reading from installation media, or a problem with this package.
I've installed .NET 4.0 and VS2012 Tools for Office Runtime first and then installed excel 2010 according to the instructrion on Microsoft web site. And the msi Microsoft SQL SERVER 2012 PowerPivot for excel was downloaded from MS site. Any idea?
Thanks in advance,
i have installed sql server 2005 in my system, but while connecting i am getting this error
TITLE: Connect to Server
------------------------------
Cannot connect to dell-PC.
------------------------------
ADDITIONAL INFORMATION:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
------------------------------
BUTTONS:
OK
--------------------------
------------------------------------------------------------------------------------------------------------------------------------------------------------
I triyed everthing (uninstalling and installing again)but getting same error.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
If any one have solution help me please.
Can't connect to local server instance MSSQLSERVER in SQL Server Management Studio (SQL2005 sp2/Vista).
SQL Server Configuration Manager reports SQL Server2005 services: SQL Server (MSSQLSERVER) Running. This would indicate the name of the SQL server is "MSSQLSERVER" correct? I chose "default" instance during the install and that is the name it gave itself.
I tried connecting to the server using the following for the Server Name: MSSQLSERVER and .\MSSQLSERVER neither works.
The only thing that works for my installation is just plain ".\" (no quotes) and nothing else. Can this be correct because I can't find any reference to this. Thanks.
Hello,
I have Sql Server 2008 R2 Enterprise (full version) and I need to move (all databases and users) to new server with Sql Server 2012 Web edition.
How should I do?
Manuel
HI,
Iam Dileep, Iam a beginer to sqlserver and self learner.
can you please help me how to install sqlserver 2008 on windows home edition.
We have an InstallShield installation package that spawns an installation of MS SQL Server 2008 R2, depending on what components the user selects to install. This has worked fine, but now we need to support Windows Server 2012 and Windows 8, so we want to
distribute SP2 of SQL Server 2008 R2 Express Edition instead of the original SP1. The only difference made to the installation package is to replace the redistributable of SQL Server R2 Express Edition SP1 with SP2. If the SP1 version is used Windows 2012
and Windows 8 will popup a message saying that there is compatibility issues with that version of SQL Server.
When the installation package use SQL SP2 the SQL Server installation starts, extracts files etc and and begins the installation, but then freezes at the step ExecuteStandardTimingsWorkflow displayed in the installer UI.
There is no significant CPU usage and no increase in memory by any process like msiexec or similar and there is no error message displayed.
It is not possible to cancel the installation either (cancel button disabled). Reviewing the SQL Server log files shows the following lines in the Detail_ComponentUpdate log
2012-08-23 08:33:06 Slp: Sco: Attempting to open registry subkey SOFTWARE\Microsoft\VisualStudio\9.0
2012-08-23 08:33:06 Slp: Sco: Waiting for service 'msiserver' to accept the stop request.
2012-08-23 08:33:06 Slp: Sco: Returning service status Running
2012-08-23 08:33:11 Slp: Sco: Returning service status Running
2012-08-23 08:33:16 Slp: Sco: Returning service status Running <- repeated indefintely until the installer is killed in task manager
When using SP1 the same log files says the following
2012-08-23 11:00:57 Slp: Sco: Attempting to open registry subkey SOFTWARE\Microsoft\VisualStudio\9.0
2012-08-23 11:00:57 Slp: Sco: Waiting for service 'msiserver' to accept the stop request.
2012-08-23 11:00:57 Slp: Sco: Returning service status Stopped
The problems appears to be that the installer cannot shutdown the msiserver service and just loops indefinitely.
The following conditions apply to all tested machines which is Windows 8, Windows Server 2012 RC, Windows Server 2008 R2
Machine is clean, no existing versions of SQL Server exists prior to installation. All security updates etc. applied.
Logged in user is local administrator.
Installation is successful if the SP1 version of SQL Server 2012 is used instead of the SP2 version
The SP2 version can be installed successfully from the command prompt (run as administrator). In this case I use the following command
line (replaced password with ****):
SQLEXPR_x86_ENU.exe /ACTION=install /INSTANCENAME=PRODACAPO /IACCEPTSQLSERVERLICENSETERMS /HIDECONSOLE /QUIETSIMPLE /SECURITYMODE=SQL /SAPWD=**** /SQLSVCACCOUNT="NT AUTHORITY\SYSTEM"
Display language is US English and SQL Server package is US English. Input/keyboard language is Swedish.
Windows Installer service cannot be shutdown from services as Stop and Restart options are disabled.
No summary.txt file is created when the installation freezes
Are there any changes in the behavior of the installation package from SP1 to SP2? Since SP1 works it seems that InstallShield cannot be blamed for this problem? However, installing from the command prompt works which means that the problem seem to lie in with
how the SQL installation is spawned from InstallShield. Currently this problem is preventing us from supporting Windows Server 2012 and Windows 8 properly.
If you need any log files or other info I can provide that promptly.
Related problems for other users:
http://stackoverflow.com/questions/11741803/fail-to-install-sql-server-2008-r2-as-a-feature-pre-requisite-in-a-wix-project
http://social.msdn.microsoft.com/Forums/en-NZ/sqlsetupandupgrade/thread/ce69b4e1-939f-4a64-9b44-e6ffdad3b9c8
The SP2 redistributable I use can be downloaded from here (SQLEXPR_x86_ENU.exe):
http://www.microsoft.com/en-za/download/details.aspx?id=30438
Thanks
Fredrik
Frede
When ever I click on an MDF file in VS2005 I get the following message.
Required Components Missing.
Connections to SQL Server Files (*.mdf) require SQL Server Express 2005 to function properly. Please verify the installation of the component or download from the URl: http:go.microsoft.com/fwlink/?linkID=49251.
I think this may have been due to the install order and options I selected.
1. VS2005 Pro, without SQL Server Express 2005 as I was planning to install SQL2005 Developer.
2. SQL2005 Developer.
I then noticed the above problem and installed SQL Server Express 2005 from the VS Pro DVD. I still have the problem.
Any ideas how I can fix this ?
ERROR LOG CONTENTS BELOW:
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal): -2061893608
Exit facility code: 1306
Exit error code: 24
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Start time: 2010-08-16 14:52:16
End time: 2010-08-16 15:24:53
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20100816_145006\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.50.1600.1%26EvtType%3d0xE53883A0%400xBE03358B%401306%4024
Machine Properties:
Machine name: MICHAEL-PC
Machine processor count: 2
OS version: Windows 7
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x86
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 0
Installation location: F:\x86\setup\
Installation edition: STANDARD
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: True
AGTSVCACCOUNT: NT AUTHORITY\SYSTEM
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Data
ASDOMAINGROUP: <empty>
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: Michael-PC\Michael
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20100816_145006\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: False
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,REPLICATION,FULLTEXT,AS,RS,BIDS,CONN,IS,BC,SDK,BOL,SSMS,ADV_SSMS,SNAC_SDK,OCS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
IACCEPTSQLSERVERLICENSETERMS: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE:
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\SYSTEM
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: Michael-PC\Michael
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 1
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20100816_145006\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code:
0xBE03358B@1306@24
Configuration error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20100816_145006\Detail.txt
Feature: SQL Client Connectivity SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code:
0xBE03358B@1306@24
Configuration error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20100816_145006\Detail.txt
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code:
0xBE03358B@1306@24
Configuration error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20100816_145006\Detail.txt
Feature: Analysis Services
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Reporting Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code:
0xBE03358B@1306@24
Configuration error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20100816_145006\Detail.txt
Feature: Integration Services
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Connectivity
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Business Intelligence Development Studio
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Books Online
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Microsoft Sync Framework
Status: Passed
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20100816_145006\SystemConfigurationCheck_Report.htm
I installed an evaluation copy of SQL 2012 to check it out while trying my hand at the new SSRS skills I'm learning. I now have one reporting solution and am having recurring problems with SQL 2012 security when I need to log into different schemas to pull some sample data and trying at the same time to figure out how an end user would eventually be able to choose which schema they want a report run on. So far, I'm not finding that possible in SSRS like it is in Cognos.
Since the clients who may eventually use some reports I'm creating are using SQL 2008, maybe I should go back to a dev install of 2008 and continue playing around there and experimenting with what SSRS can do and how I would get some things moved to a production server eventually. I understand SSRS didn't change much between 2008 and 2012.
Are there any issues with opening a 2012 SSRS project in SSRS 2008 R2? I could uninstall SQL 2012 and install 2008 and try, but if it doesn't work.... I really don't want to have to start over. So, then I thought, would it be possible to install 2008 when I already have 2012 installed so that I effectively have both versions to test things out and still have 2012 to open the file if 2008 can't....
So, 2 questions here:
1. Should I be able to open my SSRS project file in 2008 when it was created in 2012? i.e., is it backwards compatible?
2. If #1 is not possible, is it possible, or if no one knows, is it possible to install 2008 when 2012 is already installed..? Choosing an instance name, different folders, etc...?
Thank you!!
Dana
Trying to install SS 2008 R2 (Express or Standard) on Windows 7 x64 laptop with vs2010. I consistantly get a permissions error. My user is in local 'Administrators' group and I tried running with 'Run as Admin'. I tried manually setting permissions on the 'Microsoft SQL Server' folder (and children) to give Full control to all users.
I've tried about a dozen different installs. Similar problem at http://social.msdn.microsoft.com/Forums/en-US/sqlsetupandupgrade/thread/0249fd3a-5516-4cf6-b0da-ee65ef1ab500 but I'd prefer not to reinstall windows!
Error:
TITLE: Microsoft SQL Server 2008 R2 Setup
------------------------------
The following error has occurred:
Updating permission setting for folder 'C:\Program Files (x86)\Microsoft SQL Server\90\Shared\' failed. The folder permission setting were supposed to be set to 'D:(A;OICI;0x1200a9;;;S-1-5-21-3499727492-2293340708-1932506944-1049)'.
Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1&EvtType=0x88792597%25400xD69AB41D
------------------------------
BUTTONS:
&Retry
Cancel
------------------------------
Thanks!
i get this error in bootstrap but version number is increased and sql server is running properly but still i see this error
can any know what is this error and how can i fix it...
2012-08-20 17:26:47 Slp: Error result: -2068578304
2012-08-20 17:26:47 Slp: Result facility code: 1204
2012-08-20 17:26:47 Slp: Result error code: 0